How Much Does Security Camera Installation Cost in Los Angeles? (2026 Guide)

Short answer: professional security camera installation in Los Angeles typically costs $400–$1,000 per camera, all-in (camera, a share of the recorder, cable and labor). A 4-camera starter system usually runs $1,500–$2,500, a 6–8 camera 4K home system $3,500–$7,000, and a 12–16 camera system with license-plate or AI cameras $10,000–$16,000+.

The biggest price drivers are how hard the cable runs are (single-story with an attic vs. two-story stucco), the camera brand, and how many days of video you want to keep. Wired PoE systems with a local recorder have no required monthly fee.

Security camera installation cost by system size

These are typical installed prices in the San Fernando Valley and West LA in 2026, including cameras, recorder (NVR), hard drive, cable, mounting hardware and labor. Your exact quote depends on the property — that is why we do a free on-site estimate before quoting.

SystemTypical useInstalled price
4 cameras, budget 4K PoE + NVRCondo, townhouse, small single-story home: front door, driveway, back yard$1,500–$2,500
6–8 cameras, budget 4K PoE + NVRTypical single-family home, full perimeter$3,500–$5,000
6–8 cameras, UniFi ProtectHome owners who want a polished app, AI alerts, easy expansion$4,500–$7,000
12–16 cameras, premium 4K / AI / LPRLarge hillside homes and estates (Encino, Tarzana, Calabasas)$10,000–$16,000+
8–16 cameras, small businessRestaurants, retail, offices, warehouses$5,000–$12,000 (permits extra if required)

Rule of thumb: on a home system, labor is usually 40–60% of the total; on budget-brand systems it can be more than the hardware itself.

Equipment prices in 2026

Hardware is the part of the quote you can compare online. Typical street prices for the equipment we install most often:

EquipmentExamplesTypical price
Budget 4K PoE cameraReolink RLC-810A / RLC-820A$85–$95 each
Mid-range PoE cameraUniFi G5 Bullet, G4 Dome, G4 Bullet$149–$199 each
Premium 4K / AI cameraUniFi G5 Turret Ultra, G4 Pro, AI Theta$399–$449 each
PTZ (pan-tilt-zoom) cameraUniFi G4 PTZabout $1,300
Video doorbellReolink, UniFi G4 Doorbell$80–$199
NVR (recorder)Reolink 8-ch with 2 TB / 16-ch with 3 TB; UniFi UNVR / UNVR Pro$140–$499
Surveillance hard driveWD Purple, Seagate SkyHawk 4–8 TB$120–$220
PoE switch (if the NVR has no PoE ports)UniFi USW-Lite-8-PoE, TP-Link Omada 8-port$69–$109

We install HikVision, UniFi Protect and Reolink most often, and we are happy to install equipment you already bought.

Labor: what installers charge in Los Angeles

Licensed low-voltage installers in LA typically charge $100–$150 per technician-hour. Most companies, including us, quote a fixed project price after a site visit rather than billing by the hour, but the hours drive the price:

  • Single-story home with an accessible attic: about 2–3 technician-hours per camera (run cable, mount, weather-seal, aim, configure).
  • Two-story home, finished ceilings or no attic access: 3–5 hours per camera — cables are fished through walls or run in painted exterior conduit.
  • Setup that is often forgotten in DIY quotes: recorder and hard-drive setup, motion zones, phone app on every family member's device, remote access, and a walkthrough.

7 things that change the price

  1. Number of cameras. Most LA homes need 4–8 cameras to cover entrances, driveway, side yards and back yard. Each extra camera adds roughly $250–$700 installed.
  2. Wiring difficulty. Stucco exteriors, two-story walls, tile roofs and long runs to a detached garage add hours. A single PoE cable run can be up to 328 ft (100 m); beyond that a switch or fiber is needed.
  3. Camera quality. Reading license plates or faces at a distance needs a higher-end camera with a narrow lens (30–60°) placed at the right height — a wide-angle doorbell will not do it.
  4. Video retention. Storage grows with cameras × bitrate × days. For example, 8 cameras recording 24/7 at 4 Mbps for 30 days need about 10 TB; 16 cameras at 6 Mbps for 30 days need about 34 TB. Businesses often keep 60–90 days.
  5. Network. If your router and WiFi are weak, remote viewing will be unreliable. A PoE switch or a network upgrade may be part of the job.
  6. Extras. Video doorbell, floodlight cameras, audio, integration with smart locks, gates or access control.
  7. Commercial requirements. Plenum-rated cable in air-handling ceilings (about 60% more expensive than regular Cat6), permits and inspections, signage.

Sample budget: 8-camera 4K system for a single-story home

Here is how a typical value-focused system for an approximately 1,800 sq ft single-story home with attic access adds up. This is an illustrative breakdown built from current equipment prices and our standard labor, not a specific client's invoice.

ItemCost
8 × 4K PoE cameras (Reolink RLC-810A class)$680
8-channel PoE NVR with 2 TB drive$140
Cat6 cable, conduit, junction boxes, mounts, sealant$270
Labor: 2 technicians, one long day (about 20 technician-hours), setup and training$2,000
Equipment handling and sales taxabout $500
Totalabout $3,600–$4,000

Swap the cameras for UniFi Protect (G5 Bullet / G4 Dome) and a UNVR with an 8 TB drive and the same home lands at roughly $4,500–$6,000 — you pay more for a better app, AI detection and longer retention.

Monthly fees: local NVR vs. cloud cameras

  • Wired PoE cameras + local NVR: $0/month required. Video stays on your recorder; you watch live and playback from your phone.
  • Optional cloud backup: usually about $5–$10 per camera per month.
  • Consumer WiFi cameras (Ring, Nest and similar): cheaper up front, but recording history requires a subscription — Ring Protect plans, for example, range from about $4 to $20 per month.

Over five years, a subscription-based system often ends up costing as much as a professionally wired one, with lower video quality and dependence on WiFi.

Los Angeles–specific costs

Permits

For a typical home, low-voltage security cameras generally do not need a building permit in Los Angeles. A permit is needed if the job adds new electrical circuits (done by a C-10 electrician) or involves structural changes. Commercial camera and access-control systems more often require permits; when they do, expect roughly $200–$500 for plan check, $100–$300 for the permit and $50–$150 for inspections. See our full guide to security camera permits in Los Angeles. Always confirm with the LA Department of Building and Safety or your city (Burbank, Calabasas and others have their own departments).

HOA approval

Many condo and hillside communities require architectural approval before exterior cameras go up, and may require color-matched cameras or painted conduit. Budget a little extra time — and sometimes paint — for that.

Privacy and audio

California is a two-party consent state for recording conversations, so be careful with audio-enabled cameras, and don't aim cameras into a neighbor's windows or yard. Businesses should post visible "video surveillance" signs at entrances.

Heat, sun and earthquakes

Valley summers regularly pass 100°F, so we choose cameras rated for heat and avoid mounting them in direct afternoon sun where glare washes out the image. Recorders and network racks are secured against earthquakes, and cables get service loops and strain relief. Coastal properties need corrosion-resistant mounts and hardware.

DIY vs. professional installation

A DIY 4-camera kit costs a few hundred dollars, and that is a fine choice for a renter or a small condo. The savings shrink once the job involves attic or wall runs, ladder work on a two-story house, weather-sealing stucco penetrations and correctly aiming cameras for faces and plates. A professional install also gets you a warranty on the work and someone to call when the app stops connecting. A middle path many homeowners pick: buy your own equipment and pay only for installation and setup.

Get an exact price for your property

We serve Encino, Sherman Oaks, Studio City, Tarzana, Woodland Hills, Calabasas, Van Nuys, Burbank and the rest of the San Fernando Valley and West LA. The on-site estimate is free.

Frequently asked questions

How much does it cost to install one security camera?

Adding a single wired camera to an existing system typically costs $250–$700 in Los Angeles, including the camera, cable and labor. The range depends mostly on the camera model and how hard the cable run is.

Is a wired (PoE) or wireless camera system cheaper?

Wireless consumer cameras are cheaper up front but usually need a monthly subscription and depend on your WiFi. Wired PoE cameras cost more to install, have no required monthly fee, give a more reliable 24/7 recording and usually cost less over five years.

Do I need a permit to install security cameras in Los Angeles?

For most homes, no — low-voltage cameras generally don't require a building permit. Permits are needed for new electrical circuits or structural work, and commercial systems more often require them. HOA approval may still be required.

Are there monthly fees after installation?

Not with a local NVR: video is stored on your own recorder and the phone app is free. Cloud backup is optional and usually costs about $5–$10 per camera per month.

How long does installation take?

Most residential systems are installed in 1–3 business days; a 4–8 camera single-story home is often done in one day.

Can I buy my own cameras and pay only for installation?

Yes. We install customer-supplied equipment. We'll check compatibility first, since some consumer WiFi cameras can't be hard-wired or recorded to an NVR.

How much storage do I need?

For a typical home, 30 days of recording is a good target. Eight cameras recording 24/7 at about 4 Mbps need roughly 10 TB for 30 days; motion-only recording needs much less.